Routing

BUZZNET IRC ROUTING NETWORK

This Wiki is Under Construction And Updated Every Day....

This is a Private Network. We can remove you at any time, for any reason.

Buzznet Routing Network

First you should know,

    We are looking for servers with good bandwidth and connectivity, in most

    cases hosted and sponsored by ISPs or network operators.

Server Rules

• IRCops are not allowed to use their powers over registered channels
• IRCops are not allowed to disconnect users or servers without a good reason
• IRCops are not allowed to do anything that could result in damage to the server or its users

Requirement

• YOU NEED ROOT

• The server's hardware and bandwidth (Minimum ram 1024MB)

• The server use your own domain.
• The server must have a Static IP address
• You must have knowledge about how to set up and maintain an IRC Server
• People should have version of UnrealIRCd 6.x if not your link is deny

WARNING

• Dont try to link if your not in my link block you gona get ZLINE
• join irc.buzznet.ovh and ask Parrot for Help to get the password for the uplink

Step 1: Preparing your system

• first login as root

• you will need a few tools, like: wget, libssl-dev, etc.
• On Ubuntu, Debian and the like, you can install these with

  apt update & apt install wget build-essential python3 libssl-dev

• It is usually a good idea to run UnrealIRCd on it's own user. You can create a ircd user with

  adduser ircd

• Switch to the new ircd user with

  su ircd

Step 2: Downloading and building the IRCd

We will download Unrealircd

• Get the IRCD source code with

  wget --trust-server-names https://www.unrealircd.org/downloads/unrealircd-latest.tar.gz

• Decompress the file with

  tar xzvf unrealircd-6.2.2.tar.gz

• move to your folder ..with

  cd unrealircd-6.2.2

• Configure it for compilation with

  ./Config

• The script will ask you a few questions. It is recommended to pick the defaults for everything, so you can just hit enter on every question.
• After you finish configuring, you can now compile and install UnrealIRCd with

  make && make install

Step 3: Preparing Your Configuration

• Buzznet uses "cloak_sha256" module.

loadmodule "cloak_sha256";

• you need to change the network name for "Buzznet"

network-name        "Buzznet";

• change your hidenn host prefix for "Buzznet"

hiddenhost-prefix   "Buzznet";

• Cloak keys for your conf below

set {
   cloak-keys {
                "55c5lCu203i311G18MsldHwqwPA2848aRFrm7d0BbCMf2718p0oxyyR2NKwdSHkfSJ11y6OSXQO4K1b2";
                "jwc3i6Satr17n5YLA251sRpvdO3Lty8DmHmAp6hT3KFaRhR6aPLPqtN7A188VjIPD51oT7dM0Sgl54Mv";
                "7RsJm0h0l7yEu4R51wdo20RQM8SJ65jT5f60L08KB1CH53aJ7x1dX360eS8XH4dK8gfPc581005ED3J0";
        }
}

Suggested leaf setup

Note: make sure to edit your servers class as follows, so you don't connect to more than one hub at a time:

  class servers
  {
          pingfreq 60;
          connfreq 15; /* try to connect every 15 seconds */
          maxclients 1; /* max servers */
          sendq 20M;
  }

• running a leaf server follow these instructions:

1. Create a separate hubs class with maxclients set to 1.
2. Make sure their link blocks use the hubs class.
3. Enable autoconnect for the hubs by adding autoconnect; to the options { tls; } block.

• hubs class block would look like this:

 class hubs {       
       pingfreq 60;
       connfreq 60;
       maxclients 1;
       sendq 20M;
 }

• hubs link block would look like this:... this is the link block for Buzznet (dont forget to ask the password xD)

 link irc.buzznet.ovh {
     incoming {
         mask *;
     }
     outgoing {
         hostname irc.buzznet.ovh;
         port 6900;
         options { tls; autoconnect; }
     }
     password "awesome.base64.fingerprint" { spkifp; }
     class hubs;
 }

Suggested server setup

UnrealIRCd by default does not send a fake quit/join for "Changing host" when a ip/spoof/cloak/vhost/whatever is changed. This can be an issue for some clients and bots. This setting will only send the fake quit/join to clients on your server that do not support CHGHOST. This setting will not override CHGHOST. NOTE: UnrealIRCd uses PART instead of QUIT.

set {
    allow-userhost-change force-rejoin;
}

• if you are updating UnrealIRCd 5.x to 6.x you need to change this

log {
        source {
            !debug;
            all;
        }
        destination {
            file "ircd.log" { maxsize 100M; }
        }
}